Single Cranks Hospital Bed with 100% Quality Guarantee and ...

1.Bed panel The bed surface is made of high-quality cold-rolled steel strips, with a thickness of 1.2mm and an M-shaped design, which is breathable and has anti-slip function. There are no solder joints on the surface, there are steel pipe reinforcements on the back, and it adopts a double support structure to extend the life of the hospital bed. Four: Main components of the bed: 1. The bed frame is made of 40mm×80mm×1.2mm high-quality carbon steel rectangular tube;
2. The four corners of the bed are equipped with anti-collision corners. The corners are made of one-time injection molding of ABS engineering plastic. The corners can only be disassembled with special tools, and the appearance is beautiful. There are infusion pole sockets at the four corners of the bed, so you can choose the infusion position as needed. Five: Guardrail Guardrail: Six-speed aluminum alloy folding guardrail, fully covered structure, six-speed design, the surface of the guardrail is electrophoresis hardened, anti-pinch design, and can be adjusted up and down as needed. It can be covered with a high-quality dining table board as needed to facilitate patients' daily eating and reading. When the guardrail is retracted, it is slightly lower than the mattress, which is ergonomic. D-type ABS handrails can be retracted freely; the upper and lower supports of the guardrail are made of cold steel stampings with a thickness of ≥3.0mm. Each support is covered with an ABS jacket and a high-strength glass fiber nylon quick positioning switch. It is dustproof, beautiful, durable, and can withstand 50kg tensile load, stable, not easily damaged, anti-pinch, easy to operate.Six: Bedside and footboard 1. Made of high-strength engineering plastic injection molding, the surface is smooth and easy to clean; 2. It adopts a hanging structure, which has high strength, strong stability, and easy disassembly. The front and rear plastics are partially integrated and have high strength. Seven: casters 1. The bed foot adopts 50×50×1.2mm steel frame; 2. Four brake casters with a diameter of ≥5 inches, four corners with independent braking functions, anti-static, good silent effect, and strong braking ability. The rotation should be flexible and reliable. The casters and the bed frame are firmly assembled, and the bed will not slide relative to each other after braking. , convenient for implementation and control. The main frame and wheel core of the caster are made of PA6 material with strong load-bearing capacity, which is oil-resistant, wear-resistant, drug-resistant and chemical-resistant, ensuring the service life of the caster. The wheel surface material is made of wear-resistant TPR, which is oil-resistant. , water-resistant, drug-resistant and mold-resistant, and also has good shock absorption and noise reduction functions. The casters are equipped with precision bearings inside to reduce noise and improve the overall smoothness of the casters.

1. Q: Are you a manufacturer or a trading company?

     A: We are a manufacturer, and we have our own factory. We also have cooperative factories who can produce components           and matching products for us and our customers.
      2.Q: Do you provide OEM or ODM service if customers need?     A: Yes. We have experienced research & develop team as well as corresponding equipment, so we can produce as per                 customers' requirements, including OEM or ODM service.
     3.Q: What's your MOQ? What discount we can get if we place a big order?    A: Our MOQ is one set. The unit price is different depends on order quantity. The more quantity you order, the unit price will be      cheaper.  
    4.Q: What's your payment term? What's your accepted payment type?   A: 30% deposit before producing and the remaining 70% is paid before shipping. Accepted payment type: T/T, L/C, Credit             Card,  West Union etc.
    5.Q: What trade terms can you do?   A: Usually FOB, CFR, CIF, EXW, DDU, other terms can be negotiated.
   Sending by sea, air or Express are available.
 

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Adjustable Medical Beds For Home, Health Care Bed, Crank Hospital Bed, We will do our best to meet or exceed customers' requirements with quality products, advanced concept, and efficient and timely service. We welcome all customers. OEM/ODM China Multi Purpose Back Bone Patiant Hospital Bed - Two function hospital bed – Webian Detail:

Headboard/Footboard

View Details

Detachable ABS bed headboard

Gardrails

Aluminum alloy and stainless steel guardrail

Bed surface

High quality large steel plate punching bed frame Lmm x W900mm

Brake system

125mm silent with brake casters,

Back lifting angle

0-75°

Leg lifting angle

0-45°

Max load weight

≤250kgs

Full Length

For more information, please visit KAIRUIJIEDE.

mm

Full width

960mm

Options

Mattress, IV pole, Drainage bag hook, dinning table

HS CODE

1. Bed Headboard
2. Bed Footboard
3. Bed-frame
4. Back panel
5. Welded bed panel
6. Leg panel
7. Foot panel　
8. Crank for back lifting
9. Crank for leg lifting
10. Cranking mechanism
11. Toilet hole
12. Crank for toilet hole
13. Guardrails
14. Casters

It is suitable for patient nursing and recuperation.

1. Bed headboard and footboard
Insert the fixed screw of bed frame into the groove of headboard and footboard (as shown in figure 1).
2. IV stand: insert the IV stand in the reserved hole.
3. ABS dinning table: Put the table on the guardrails and clamp it tightly.
Aluminum or stainless steel guardrails:Fixed the guardrail with screws through the holes of guardrail and bed frame.

1. Back rest lifting: Turn the crank clockwise, the back panel lift
Turn the crank counterclockwise, the back panel down.
2. Leg rest lifting: Turn the crank clockwise, the leg panel lift
Turn the crank counterclockwise, the leg panel down.
3. Toilet hole: Pull out the plug, the toilet hole is opened; push the toilet door, then insert the plug, the toilet hole is closed.
Toilet hole with crank device, turn the crank clockwise to open the toilet hole, turn the crank counterclockwise to close the toilet hole

1. Check that the headboard and footboard were fasten tightly with bed frame.
2. The safe working load is 120kg, the max load weight is 250kgs.
3. After installing the hospital bed, place it on the ground and check whether the bed body shakes.
4. The drive link should be lubricated regularly.
5. Check the casters regularly. If they are not tight, please fasten them again.

The packaged products can be transported by general ways of transport. During the transportation, please pay attention to preventing sunshine, rain and snow.  Avoid transportation with toxic, harmful or corrosive substances.  

Packaged products should be placed in a dry, well-ventilated room without corrosive materials or heat source.

The company is the world’s best ODM Manual Hospital Bed supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.

Product detail pictures:






Related Product Guide:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for OEM/ODM China Multi Purpose Back Bone Patiant Hospital Bed - Two function hospital bed – Webian , The product will supply to all over the world, such as: Qatar, London, Guyana, We always hold on the company's principle "honest, professional, effective and innovation", and missions of: let all drivers enjoy their driving at night, let our employees can realize their value of life, and to be stronger and service more people. We are determined to become the integrator of our product market and one-stop service provider of our product market.