FLC500 Flat Shaker Screens: Compatibility, Specifications, and Selection Guide

FLC500 flat shaker screens are replacement screen panels intended for compatible FLC500 shale shaker configurations. Before ordering, confirm the shaker model and screen-retention arrangement, then compare the panel’s physical dimensions, screen construction, and separation requirement with your current setup. The FLC500 designation alone is not enough to establish a guaranteed fit: equipment versions and panel details may vary. This guide explains what to verify and what information to share with a supplier so you can make a more informed purchasing decision.

You can find more information on our web, so please take a look.

Who This Guide Is For

This guide is for drilling contractors, mud-service companies, equipment distributors, and procurement teams sourcing replacement FLC500 flat shaker screens. It is also useful for maintenance personnel who need to identify a panel before placing an order. If you are changing the shaker, screen configuration, or target cut point, treat the purchase as a technical selection rather than a like-for-like replacement. Confirm the application and fit with the equipment documentation or supplier before installation.

How FLC500 Flat Screens Work

A shaker screen is a replaceable screening surface used to separate drilled solids from drilling fluid as the fluid passes across a vibrating deck. The screen’s mesh arrangement and construction influence which particles are retained, while the shaker’s motion and operating conditions also affect separation. A flat screen refers to the panel format; it does not, by itself, specify the screen’s mesh, material, or exact compatibility. For this reason, buyers should review both the panel interface and the intended screening duty.

Common Applications

FLC500 flat screens may be considered for drilling-fluid solids control where the installed shaker is confirmed to accept the relevant panel format. The appropriate screen selection depends on the fluid, solids loading, desired separation, and operating conditions. A screen suitable for one drilling program may not be the best option for another. Share the application details with your supplier rather than selecting by model name alone.

Types, Materials, and Specification Considerations

Replacement screens can differ in mesh configuration, number of screen layers, wire material, support structure, and bonding or edge details. The actual options available depend on the supplier’s product range and the required panel design. Stainless steel wire is commonly used in shaker screen construction, but buyers should confirm the offered material and construction rather than assume a particular grade. Request a specification sheet that identifies the product being quoted.

Key Information to Confirm

• Equipment and panel identification: Record the shaker model, screen position, and any part number or markings on the existing panel.
• Physical dimensions: Measure the panel length, width, and thickness in millimetres (mm). Compare the measurements with the supplier’s drawing or dimensional confirmation.
• Retention and sealing details: Check the panel edges, seals, handles, and retaining features against the installed deck design.
• Screen specification: State the requested mesh or separation requirement and ask how the supplier describes the offered screen. Where relevant, confirm whether an API RP 13C designation or equivalent classification is provided for that product.
• Construction and service conditions: Ask about the wire material, screen layers, support arrangement, and any operating limitations stated by the supplier.

Do not treat mesh count as a complete performance specification. The opening size and screening behaviour can depend on the screen design and how its specification is reported. Ask the supplier to explain the designation and provide product-specific documentation, especially when comparing alternatives. If you are replacing a screen already in service, send its label, photographs, and measurements where possible.

Compatibility and Application Matching

Compatibility has two parts: whether the panel fits and locks into the shaker, and whether its screening characteristics suit the job. A panel that appears similar may still differ in dimensions, retention features, or edge construction. Likewise, a physically compatible screen may not deliver the separation your drilling-fluid program requires. Verify both parts before approving an order.

Goto Yuanpeng to know more.

A Practical Selection Framework

1. Identify the installed equipment. Confirm the shaker model and, where available, the equipment or screen part number from the nameplate, manual, or maintenance records.
2. Document the existing panel. Record its length, width, and thickness in mm, plus edge, handle, and sealing details. Take clear photographs from the top, underside, and sides.
3. Define the screening need. Tell the supplier the drilling-fluid application, the current screen specification, and the reason for replacement or change. Explain whether the priority is a like-for-like replacement or a different separation target.
4. Review the proposed product. Compare the supplier’s drawing and specification with your measurements and application. Resolve differences in model naming, mesh terminology, or retention design before purchase.
5. Confirm order and installation details. Agree on quantity, packaging, delivery destination, documentation, and any inspection requirements. At receipt, compare the delivered panels with the approved specification before fitting them.

This process creates three useful measurement checkpoints: panel length, panel width, and panel thickness, each recorded in mm. These dimensions do not replace confirmation of the retention system or the manufacturer’s fit guidance. If measurements from the old screen are uncertain, ask the supplier which reference points to use. Do not force a panel into place when its fit is unclear.

Common Selection Mistakes

• Ordering by “FLC500” only: A model label is a useful starting point, not proof that every panel variation is interchangeable.
• Choosing solely by mesh count: Mesh terminology may not fully describe opening size, construction, or application suitability.
• Ignoring edge and retention details: Small differences in the panel interface can affect installation and sealing.
• Changing specifications without application review: A finer or coarser screen may affect solids handling and fluid recovery; discuss the change with the responsible drilling-fluid or equipment specialist.
• Approving a quote without a defined specification: A written product description and drawing help reduce misunderstandings between buyer and supplier.

Pricing, MOQ, and Lead Time

Pricing for FLC500 flat shaker screens can vary with screen construction, mesh specification, order quantity, packaging, and destination. Minimum order quantity (MOQ) and lead time are supplier- and order-specific, so they should be confirmed in the quotation rather than assumed. For an accurate offer, provide the required quantity, delivery location, target specification, and any requested documentation. If the order is time-sensitive, ask the supplier to confirm production or stock status and the estimated dispatch schedule in writing.

When comparing quotations, check that each supplier is pricing the same panel dimensions, retention design, material description, and screening specification. A lower quoted price may reflect a different construction or scope, so compare like for like. Also clarify whether freight, packaging, and any inspection documents are included. These details help procurement teams assess the total sourcing requirement, not just the unit price.

Supplier Evaluation Checklist

Choose a supplier that can discuss both product fit and application requirements. Ask for a dimensional drawing or written confirmation against your panel measurements, along with a clear description of the offered screen. A responsive supplier should be able to explain what information is still needed instead of making unsupported compatibility guarantees. Keep the approved specifications with your purchase records to support future replenishment.

• Can the supplier confirm the panel dimensions and retention details against your equipment information?
• Are the mesh designation, wire material, and construction clearly described?
• Can the supplier clarify available options, MOQ, and lead time for your quantity and destination?
• Will the quotation identify the product specification and any agreed documentation?
• Is there a clear process for resolving fit or specification questions before shipment?

Key Takeaways and Next Steps

FLC500 flat shaker screens should be selected by verified panel compatibility and application requirements, not by the model name alone. Confirm the shaker configuration, measure panel length, width, and thickness in mm, and check the retention features alongside the requested screen specification. Ask suppliers to document the proposed product, lead time, and MOQ in the quotation. These steps give buyers a practical basis for comparing replacement options while reducing avoidable fit and sourcing uncertainty.

Yuanpeng supplies wire mesh products and can review your FLC500 screen requirements using the equipment model, panel measurements, photographs, requested screen specification, quantity, and delivery destination. Send these details when requesting a quotation so we can assess the product configuration and clarify any information needed before order confirmation. Final compatibility should be verified against the actual shaker and approved product drawing.

Want more information on FLC500 Flat Shaker Screens? Feel free to contact us.