Double Padel Court Dimensions and Installation Requirements

A double padel court uses the standard doubles format: an enclosed playing area measuring 20 metres long by 10 metres wide. For a reliable installation, I recommend planning more than the marked court footprint because players, maintenance teams, drainage, lighting, access routes, and safety clearances also require space. A practical project normally includes the court structure, reinforced foundation or slab, artificial turf, net system, glass and mesh panels, lighting, drainage, and site access. This guide explains the key dimensions, installation requirements, material choices, and purchasing considerations for developers, sports facility operators, contractors, and distributors.

Check now

What Is a Double Padel Court?

A double padel court is the enclosed court format designed for four players, with two players on each side. The court is divided by a central net and surrounded by transparent glass and metallic mesh panels that form the playing enclosure. Because the walls are part of the game, the court must be built with accurate alignment, stable anchoring, and consistent internal dimensions.

When I discuss a double padel court with a buyer, I distinguish between the playing area and the overall construction area. The playing area is generally 20 m × 10 m, while the external footprint may be slightly larger depending on the frame, posts, access doors, lighting layout, and manufacturer’s construction method. This distinction is important when checking whether a site can accommodate one or several courts.

Core Double Padel Court Dimensions

Playing Area and Clear Height

The standard internal court size is 20 m × 10 m, providing approximately 200 square metres of playing surface. The net is positioned across the width of the court, creating two equal halves along the length. I recommend maintaining a minimum clear height of approximately 6 m above the playing area where possible, especially for indoor facilities or projects intended for organized play.

The enclosure commonly uses glass at the back and side sections, together with galvanized or coated steel mesh. End walls are often around 3 m high, while side-wall configurations can vary by design and applicable sporting requirements. Since wall geometry and glass layouts may differ between court models, I advise buyers to approve a dimensioned technical drawing before production rather than relying only on catalogue photographs.

Net, Doors, and Circulation

The central net should be installed square to the court length and tensioned evenly so that the playing surface is divided correctly. Door positions may be placed on one or both sides, depending on whether the court is designed for standard indoor access or possible outside-the-court play. If external exits are included, the surrounding area must be checked carefully for player safety, fencing, equipment, and emergency access.

The 20 m × 10 m dimension does not include spectator circulation or service access. I normally ask the project team to reserve additional space around the court for cleaning, glass replacement, lighting maintenance, and movement of installation equipment. The exact allowance depends on the building, local regulations, number of courts, and whether spectators will stand beside the playing area.

Site and Foundation Requirements

Ground Conditions and Level Tolerance

A double padel court requires a stable, level, and adequately drained base. Many installations use a reinforced concrete slab or another engineered foundation system designed for the local soil and structural loads. The slab must be checked for level, flatness, strength, cracking, and water accumulation before the steel structure is assembled.

I do not recommend placing a court directly on an unprepared surface, loose paving, or ground with unresolved settlement risk. Uneven support can affect glass alignment, door operation, mesh tension, turf performance, and the long-term condition of anchor points. A local civil engineer or qualified contractor should confirm the foundation design according to soil conditions, wind exposure, drainage requirements, and local construction rules.

Drainage and Surface Preparation

Water management is a critical part of outdoor court planning. The finished surface should direct rainwater toward suitable drainage points without creating standing water beneath the turf or around the perimeter. Drainage channels, inspection points, edge details, and connection to the site drainage system should be agreed before the slab and court frame are installed.

The foundation also needs coordinated anchor positions. I recommend marking the court orientation, net line, door locations, glass posts, mesh posts, and lighting bases before drilling or casting anchors. This reduces the risk of rework and helps the installation team keep the enclosure square.

For more information, please visit Rayjun.

Materials and Component Options

Steel Structure and Protective Finishes

The main frame is typically manufactured from steel profiles, posts, beams, and mesh-supporting elements. Buyers should ask whether the steel is hot-dip galvanized, zinc-coated, powder coated, or protected through a combined treatment system. For outdoor applications, the selected finish should match the local humidity, rainfall, salt exposure, temperature range, and maintenance plan.

As a metal building materials supplier, I focus on structural consistency, accurate fabrication, corrosion protection, and practical assembly. A coating specification should identify the treatment method and colour requirement rather than using only general terms such as “weather resistant.” Final suitability still depends on the site environment and the maintenance instructions supplied with the court.

Glass, Mesh, Turf, and Lighting

Tempered safety glass is commonly used for the enclosure because it provides visibility and supports the rebound characteristics required by padel. The glass thickness and panel configuration should be selected according to the court design, structural calculations, applicable regulations, and supplier documentation. Mesh panels should be rigid, securely fixed, and free from sharp edges or projecting components.

Artificial turf is installed over the prepared base and should be selected for padel use, drainage behaviour, fibre characteristics, and maintenance requirements. Lighting is usually integrated with poles or brackets positioned outside the active playing zone. I recommend designing the electrical system around uniform illumination, suitable glare control, weather protection for outdoor equipment, and safe cable routing rather than adding lights after the court is completed.

Step-by-Step Installation Process

1. Confirm the site survey: Measure the available land or building, verify access, review drainage, identify utilities, and confirm the proposed court orientation.
2. Approve technical drawings: Check the 20 m × 10 m internal dimensions, external footprint, doors, glass layout, mesh layout, lighting positions, and service clearances.
3. Prepare the foundation: Complete the engineered slab or base, drainage provisions, surface checks, and anchor layout before delivery of the court components.
4. Install the steel frame: Assemble the perimeter, posts, beams, mesh supports, doors, and other structural components in the specified sequence.
5. Fit glass and mesh: Install panels with suitable gaskets, fixings, clearances, and alignment checks to reduce stress and movement.
6. Install turf and net: Prepare the surface, place the artificial turf, complete line marking, and tension the net to the approved dimensions.
7. Complete lighting and inspection: Connect the electrical system through qualified personnel, inspect fasteners and edges, and verify that the court is safe and operational.

Key Purchasing Decisions for B2B Buyers

Choose the Court According to the Application

For a commercial sports centre, I would prioritize durability, replaceable components, maintenance access, and a finish that suits frequent daily use. For a hotel, residential development, or school, appearance, user safety, noise considerations, and simple maintenance may have greater importance. Indoor courts may need different corrosion protection and ventilation coordination than courts installed in exposed coastal or high-rainfall locations.

Buyers should also decide whether they need a standard court, panoramic glass design, premium finishes, custom colours, branded elements, special doors, or a multi-court layout. Customization can affect drawings, production, packing, installation sequence, and replacement-part management. I recommend separating essential performance requirements from decorative options before requesting a quotation.

Evaluate the Supplier Before Ordering

A dependable supplier should provide a complete bill of materials, foundation requirements, installation drawings, glass specifications, finish information, packing details, and maintenance guidance. I also suggest asking how damaged glass, turf, mesh, fasteners, and lighting components can be replaced after delivery. These details often matter more to facility owners than the initial product photographs.

Rayjun supports B2B buyers with metal court structures, component coordination, customization discussions, technical documentation, and export-oriented project communication. Because every site has different dimensions and regulations, I prefer to review the project drawings, destination country, quantity, installation condition, and delivery scope before confirming a commercial proposal. This approach helps clarify whether the buyer needs supply-only, installation guidance, or a more coordinated solution.

Common Installation Mistakes to Avoid

• Planning only the 20 m × 10 m footprint: This can leave insufficient room for doors, maintenance, circulation, and equipment.
• Ignoring drainage: Standing water can affect turf, foundations, anchors, and the surrounding access area.
• Using an unverified slab: The frame should not be installed until level, strength, cracking, and anchor conditions are checked.
• Ordering from incomplete drawings: Unclear glass, mesh, door, and lighting positions can cause delays and additional site work.
• Choosing finishes without considering climate: Coastal air, high humidity, and industrial pollution may require a more suitable protection strategy.

Practical Buyer Checklist

Before placing an order, I recommend confirming the internal playing dimensions, total external footprint, clear height, court orientation, foundation design, drainage approach, electrical requirements, door arrangement, glass and mesh configuration, turf specification, packaging, and installation responsibilities. The quotation should also state what is included and excluded, such as foundation work, local transport, unloading, electrical connection, lifting equipment, and commissioning.

Conclusion: How to Plan the Right Double Padel Court

The correct starting point is a standard 20 m × 10 m internal double padel court, followed by a realistic allowance for the structure, access, maintenance, drainage, lighting, and surrounding circulation. A successful installation depends not only on the court components but also on a suitable foundation, accurate anchor layout, correct glass and mesh assembly, and coordinated site services. I recommend approving detailed drawings and foundation information before production begins.

If you are sourcing a double padel court for a new facility, hotel, club, school, distributor, or sports construction project, prepare the site location, quantity, application, required customization, and delivery scope. Share these details with Rayjun so I can help review the metal structure, component configuration, technical requirements, and export supply plan. A clear specification at the beginning is the most practical way to control installation risk, purchasing cost, and project timing.

Contact us to discuss your requirements of double padel court. Our experienced sales team can help you identify the options that best suit your needs.