Sign in
Explore Guest Blogging Opportunities in Mineral Metallurgy
Explore Guest Blogging Opportunities in Mineral Metallurgy
Your Position: Home - Axles - 49575-1U000 Center Support Bearing Fitment and Replacement Guide
Guest Posts

49575-1U000 Center Support Bearing Fitment and Replacement Guide

Oct. 27, 2026

49575-1U000 Center Support Bearing Fitment and Replacement Guide

The 49575-1U000 center support bearing is a driveline component intended to support a driveshaft where the shaft is divided into sections. Before ordering, confirm that this part number matches the vehicle’s VIN, model year, drivetrain, and the part currently installed; a listing that names Hyundai or Kia alone is not enough to establish fitment. For replacement, inspect the complete center-support assembly and driveshaft mounting points, then follow the vehicle manufacturer’s procedures for removal, alignment, and tightening. This guide explains how to verify fitment, assess replacement needs, compare product details, and prepare a clear supplier inquiry.

View Details

Key Takeaways

  • Use 49575-1U000 as a starting point for fitment verification, not as the only compatibility check.
  • Compare vehicle identification, OE reference, assembly design, and dimensions before purchasing.
  • Inspect the rubber support, bearing, shaft, and mounting area; a noise or vibration alone does not confirm the bearing is the cause.
  • Ask suppliers to confirm the offered part’s specifications, quantity, packaging, price, and lead time in writing.

Who This Guide Is For

This guide is for parts distributors, repair shops, fleet maintenance teams, and procurement professionals sourcing a 49575-1U000 center support bearing. It is also useful for vehicle owners who want to provide a repair professional with the right identification details before ordering. If you are sourcing for a Hyundai or Kia application, verify the exact vehicle configuration rather than relying on a broad make-and-model match. When fitment remains uncertain, request a supplier review using the VIN and clear photographs of the existing assembly.

What a Center Support Bearing Does

A center support bearing supports an intermediate section of a multi-piece driveshaft. Its bearing allows the shaft to rotate, while the surrounding support—often incorporating a resilient element—holds the assembly in position and helps isolate vibration. The exact design and mounting arrangement depend on the vehicle and the specified replacement part. A center bearing is not interchangeable with a wheel bearing or a transmission bearing, even though all include a rotating bearing element.

Common Replacement Symptoms

Possible signs of a driveshaft support problem include vibration that changes with vehicle speed, a clunk during acceleration or deceleration, or visible deterioration around the support. These symptoms can also come from other driveline components, such as joints, shaft balance, fasteners, or mounts. A visual and mechanical inspection is therefore important before replacing the bearing. If the cause is unclear, have a qualified technician diagnose the vehicle rather than treating a symptom as proof of part failure.

Fitment and Specification Overview

Part number 49575-1U000 is a useful reference when searching catalogs or requesting a quotation. The supplied information associates the topic with Hyundai and Kia Sorento center-bearing searches, but it does not establish a definitive year-by-year application list. Catalog references can vary by market, production date, drivetrain, and superseded part number. Confirm compatibility with a reliable vehicle catalog or the vehicle manufacturer’s parts information before placing an order.

Details to Compare Before Ordering

  • Vehicle identity: Provide the VIN, model year, model, engine, and drivetrain where available.
  • Reference number: Compare 49575-1U000 with the OE number on the removed part or a verified catalog record. Ask the supplier to identify any proposed replacement or supersession.
  • Assembly design: Check the support bracket, rubber isolator, bearing arrangement, and mounting-hole pattern against the original assembly.
  • Dimensions: Compare the outside diameter, inside diameter, and width in millimeters (mm) where reliable measurements are available. These three measurements can help identify a mismatch, but they do not replace catalog-based fitment confirmation.
  • Condition and scope: Confirm whether the offer is for the bearing alone or a complete center-support assembly, and whether any additional components are included.

Step-by-Step Replacement Planning

  1. Record vehicle details. Collect the VIN, production year, model, engine, and drivetrain. Keep these identifiers together with the OE reference number and the intended purchase quantity.
  2. Verify the replacement part. Compare the catalog application, part number, assembly design, and available dimensions. If the old part is marked, photograph the marking before removal because a worn or damaged component may be difficult to read later.
  3. Inspect the driveline. Check the center support and nearby shaft components for looseness, damage, contamination, or uneven wear. Also inspect mounting points and related joints, since replacing one component may not address a separate fault.
  4. Plan the repair using vehicle-specific instructions. Driveshaft removal and installation may involve alignment marks, shaft phasing, fastener requirements, and safety procedures. Follow the applicable service information and use suitable lifting and support equipment; do not guess tightening values or reuse fasteners when the service instructions prohibit it.
  5. Confirm the result. After installation, check that the support is seated correctly and that connected components are secured as specified. Any road test should be performed safely and by a qualified person, with attention to whether the original vibration or noise remains.

Selection Framework for Buyers

Match More Than the Part Number

A matching number is an important screening point, but a sound purchasing decision also checks the vehicle application and the construction of the offered part. Ask the supplier to state which reference number is being quoted and what evidence was used to confirm fitment. If dimensions are supplied, compare them with an authoritative drawing or the original part rather than assuming that similar-looking products are interchangeable. Keep a record of the confirmed application for repeat purchasing.

Shengfan are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Clarify Materials and Product Scope

The center support typically combines a bearing with supporting and isolating components, but materials and construction can differ among products. Request the product drawing, material information, or inspection details that are available for the specific quotation. Confirm whether the quoted item is supplied as a complete assembly and whether packaging or labeling can identify the part number and batch. Do not assume that a material description or visual similarity alone proves service life or vehicle compatibility.

Pricing, MOQ, and Lead Time

Price and availability depend on the quoted specification, order quantity, packaging, destination, and current production or inventory status. Minimum order quantity (MOQ) and lead time are supplier-specific, so request current written terms rather than relying on a general estimate. For a one-time repair, clarify whether a sample or small order is possible; for recurring demand, ask for pricing at the quantities relevant to your forecast. Confirm currency, shipping terms, payment conditions, and whether freight and any applicable import charges are included or excluded.

Supplier Evaluation Checklist

  • Can the supplier confirm the 49575-1U000 reference against your VIN or verified OE application information?
  • Can they provide a drawing, photographs, dimensions in mm, or other product identification details for the quoted item?
  • Is the offer for a bearing only or a complete support assembly, and what exactly is included?
  • Are MOQ, unit price, packaging, lead time, and shipping terms clearly stated?
  • Can the supplier explain its available inspection, traceability, and export-documentation processes for the order?

Evaluate answers against your own technical and commercial requirements. A clear written response is more useful than a broad assurance that a part “fits,” especially when ordering for multiple vehicle configurations. If the supplier cannot verify an application from the information provided, ask what additional evidence is needed before confirming the order.

How Shengfan Can Support Your Inquiry

Shengfan supports B2B buyers sourcing axle and driveline components by reviewing the part reference and order requirements provided in an inquiry. To help us assess a request for 49575-1U000, share the vehicle details, target quantity, destination, and any available photographs or dimensional references. We can then clarify the product scope and provide the applicable quotation information for review. Fitment should be confirmed against vehicle-specific records before installation or bulk purchasing.

Conclusion: Confirm Fitment Before You Buy

The safest approach to sourcing a 49575-1U000 center support bearing is to verify the part against the exact vehicle and compare the replacement assembly with the original specification. Record the VIN and OE reference, confirm the component scope and relevant dimensions, and use vehicle-specific service instructions for replacement. If you are ready to request pricing, send Shengfan your application details, quantity, destination, and any reference photos or drawings. This gives both buyer and supplier a practical basis for confirming the inquiry before purchase.

If you want to learn more, please visit our website 49575-1U000 Center Support Bearing(pt,ja,tr)(tl,ms,bn).

Comments

0 of 2000 characters used

All Comments (0)
Get in Touch

  |   Transportation   |   Toys & Hobbies   |   Tools   |   Timepieces, Jewelry, Eyewear   |   Textiles & Leather Products   |   Telecommunications   |   Sports & Entertainment   |   Shoes & Accessories   |   Service Equipment   |   Sitemap