38mm Particle Board: Sizes, Specifications, and Uses

38mm particle board is a thick engineered wood panel made by bonding wood particles with resin under heat and pressure. Buyers typically consider it for deep shelves, counters, work surfaces, furniture components, and other applications where a substantial panel thickness is specified. The nominal thickness is 38 mm, approximately 1.50 in, but actual dimensions, tolerances, surface finish, and performance depend on the product and supplier. At XINBODA, we recommend confirming the full specification and intended use before requesting a quotation.

You can find more information on our web, so please take a look.

Key Takeaways

• Specify panel length, width, nominal thickness, tolerance, finish, and edge requirements separately.
• A 2440 × 1220 mm panel is one commonly encountered format, but availability and dimensions should be confirmed for each order.
• Thick particle board can suit substantial furniture components, but support, span, loading, moisture exposure, and fixing details matter.
• Request current technical information and a quotation based on the exact specification, order quantity, and delivery destination.

Who This Guide Is For

This guide is for furniture manufacturers, shopfitters, interior contractors, distributors, and project buyers evaluating 38mm particle board. It is intended to help you translate a general thickness requirement into a purchase-ready panel specification. It does not replace project engineering, local building requirements, or a supplier’s product documentation. If your application has structural, fire, or moisture-performance requirements, define those separately rather than relying on thickness alone.

What Is 38mm Particle Board?

Particle board, also called particleboard or chipboard in some markets, is manufactured from wood particles and a binder that are formed into a panel. The finished board can be supplied with a raw surface or with a facing material, depending on the product range. A 38mm designation refers to nominal panel thickness; it does not, by itself, specify density, strength, surface quality, or suitability for a particular environment. Buyers should therefore treat thickness as one line in a complete specification.

Why Thickness Matters

A thicker panel can provide the deep visual profile required for a furniture or interior design, and it can offer more material depth for certain edge treatments or connections. However, thickness alone does not establish how much weight a shelf can carry or how far it can span without deflection. Performance also depends on board properties, panel dimensions, support spacing, loading, and fastening details. For load-bearing uses, ask for relevant product data and have the design checked for the actual conditions.

Sizes and Core Specifications

Panel size refers to length and width, while thickness is measured separately. A 2440 × 1220 mm sheet is a commonly encountered commercial format in the panel market, but formats vary by supplier, production range, and destination market. For a 38mm order, confirm that the requested thickness is available in the required sheet size rather than assuming every standard format is offered. If you need cut panels, provide finished dimensions and clarify whether cutting is part of the supply request.

Surface and Material Options

Depending on the supplier’s range, particle board may be available as an unfinished panel or with a decorative or functional surface. A raw panel may suit a component that will be finished later, while a faced panel can reduce some downstream finishing steps when its finish matches the project. Confirm the facing material, color, texture, and which panel faces are finished. Also ask how exposed edges should be treated, because the core may require a separate edge solution.

XINBODA are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Do not assume that a standard particle board is fire rated, moisture resistant, or suitable for exterior exposure. These are separate performance considerations that require confirmation for the exact product and intended use. If a project specification names a standard, rating, or test method, share that requirement with the supplier and request documentation that applies to the offered board. Where documentation is unavailable or unclear, avoid substituting an unverified product.

Common Uses for 38mm Particle Board

Buyers may evaluate 38mm particle board for furniture tops, counters, deep shelves, display fixtures, desks, and other interior components that call for a thick-panel appearance. The appropriate choice depends on the panel’s finish, dimensions, support conditions, and expected use. In commercial interiors, coordination with edge banding, hardware, and joinery is especially important because the thickness can affect component compatibility. Confirm the finished design with your fabricator before placing a production order.

Match the Board to the Application

• Shelves and storage: Check span, support spacing, and expected load; do not use thickness alone to predict performance.
• Countertops and work surfaces: Confirm the surface finish, edge detail, fixing approach, and resistance requirements for the actual environment.
• Furniture components: Check that fittings, connectors, and machining specifications accommodate a 38mm panel.
• Retail and display fixtures: Coordinate panel size and finish with the design, assembly sequence, and transport constraints.

How to Select a 38mm Particle Board Specification

1. Define the end use. State whether the board is for shelving, furniture, counters, or another application, and describe the conditions it will face.
2. Set the dimensions. List nominal thickness, panel length and width, finished cut sizes, and any dimensional tolerances required.
3. Choose the surface and edges. Identify the finish, color, texture, faces to be finished, and required edge treatment.
4. List performance requirements. Specify any applicable moisture, fire, emissions, or other project criteria, and request supporting product information.
5. Confirm processing and logistics. Clarify machining, packaging, order quantity, delivery location, and the required delivery schedule.

For a quotation, send a drawing or schedule when possible and distinguish between sheet dimensions and finished component dimensions. Include the quantity by size, any acceptable substitutions, and whether you need raw panels or further processing. This gives the supplier a clearer basis to review availability and pricing. It also reduces the risk of comparing quotations that cover different finishes or service requirements.

Pricing, MOQ, and Lead Time

The price of a 38mm particle board order can depend on thickness availability, sheet format, surface treatment, processing, quantity, packaging, and destination. Minimum order quantities and lead times are supplier- and order-specific, so they should be confirmed with a current quotation rather than assumed from a general product description. Custom cutting or special finishes may also affect production planning. When comparing offers, check whether prices cover the same specification, packing, and delivery terms.

Supplier Evaluation Checklist

• Can the supplier confirm nominal thickness, available panel formats, and applicable tolerances?
• Are the surface finish, edge treatment, and processing requirements clearly listed in the offer?
• Can the supplier provide product information relevant to your stated performance requirements?
• Are MOQ, production schedule, packaging, shipping terms, and quotation validity stated?
• Is there a process for reviewing drawings, samples, or specification changes before production?

At XINBODA, we can review your 38mm particle board requirements and discuss the panel size, finish, processing, and delivery information needed for a project quotation. Share your specification or drawing, estimated order quantity, destination, and any required performance criteria. We can then confirm which details need to be checked against the available product options. This makes the next step more useful than requesting a price based on thickness alone.

Conclusion: Is 38mm Particle Board Right for Your Project?

38mm particle board can be a suitable option when your design calls for a thick interior panel and the selected product meets the project’s surface, dimensional, and performance requirements. The nominal 38 mm thickness is only a starting point: panel size, tolerance, support conditions, finish, edges, and intended environment all influence selection. Before ordering, document those requirements and verify availability and product information with your supplier. To begin, send XINBODA your dimensions, application, quantity, finish preference, and delivery destination for a specification review and quotation.

For more 38mm Particle Board(ja,th,tr)information, please contact us. We will provide professional answers.