Sign in
Explore Guest Blogging Opportunities in Mineral Metallurgy
Explore Guest Blogging Opportunities in Mineral Metallurgy
Your Position: Home - Auto Bearing - 22212CA/W33C3 Spherical Roller Bearing Specifications and Selection Guide
Guest Posts

22212CA/W33C3 Spherical Roller Bearing Specifications and Selection Guide

Nov. 17, 2026

22212CA/W33C3 Spherical Roller Bearing Specifications and Selection Guide

The 22212CA/W33C3 is a spherical roller bearing intended for applications that need to accommodate radial loads, possible axial loads in both directions, and some shaft or housing misalignment. Its commonly listed boundary dimensions are 60 mm bore, 110 mm outside diameter, and 28 mm width. The designation typically indicates a CA cage design, a W33 lubrication groove and holes in the outer ring, and C3 radial internal clearance; confirm the exact construction and clearance values with the selected manufacturer before ordering.

If you are looking for more details, kindly visit our website.

This guide is for procurement teams, maintenance engineers, and equipment designers comparing this bearing for a new or replacement application. We explain the designation, core specifications, application checks, and sourcing factors that affect a purchase decision. At Tuoda Bearing, we recommend matching the bearing to the operating conditions and shaft arrangement rather than selecting by part number alone.

Key takeaways

  • Common basic dimensions are 60 × 110 × 28 mm, but verify the drawing and applicable standard for the offered product.
  • W33 generally identifies an outer-ring lubrication groove with lubrication holes, while C3 indicates greater-than-normal radial internal clearance.
  • Confirm load, speed, temperature, lubrication, fit, and misalignment requirements before approving a substitute or placing an order.
  • Request a manufacturer drawing, clearance information, packaging details, and a written quotation to compare suppliers consistently.

Understanding the 22212CA/W33C3 designation

Basic bearing type and dimensions

The 22212 designation identifies a spherical roller bearing in a particular dimensional series. Spherical roller bearings use two rows of rollers and a spherical raceway in the outer ring, a configuration that can support heavy radial loads and accommodate a degree of misalignment. The commonly listed boundary dimensions for this size are a 60 mm bore, a 110 mm outside diameter, and a 28 mm total width. These are basic dimensions, not a complete specification of load capacity, tolerance, or internal clearance.

Dimensions and suffix interpretations should be checked against the supplier’s product drawing and the bearing standard used for the order. Manufacturers may use different construction details or designation conventions. If you are replacing an existing bearing, compare the full marking and physical arrangement rather than relying only on the main size code.

What CA, W33, and C3 generally mean

In common bearing nomenclature, CA describes a cage and internal design associated with a spherical roller bearing; it is often used for a brass-cage configuration. The precise cage construction can vary, so request confirmation when cage material or design matters to your application. W33 generally denotes an outer-ring lubrication groove and lubrication holes, which can provide a route for lubricant supply. C3 indicates radial internal clearance greater than the normal group, but it does not by itself specify one universal clearance value.

These suffixes are useful starting points, not substitutes for technical confirmation. Ask the supplier to state the offered cage construction, clearance group, lubrication features, and any applicable deviations on the quotation or drawing. This is especially important when the bearing operates at elevated temperature, under interference fits, or with a lubrication system connected through the housing.

Application matching and operating conditions

Spherical roller bearings are commonly considered for equipment exposed to substantial radial loading, shaft deflection, or alignment variation. Depending on the complete machine design, a 22212-size bearing may be evaluated for industrial gearboxes, conveyors, pumps, agricultural machinery, and other rotating equipment. Suitability cannot be established from the model number alone: actual load direction and magnitude, speed, mounting arrangement, and service environment must be assessed.

For automotive-related applications, verify the bearing’s role in the assembly and the equipment maker’s requirements before treating an industrial bearing designation as a direct replacement. Automotive systems can have application-specific dimensional, performance, and validation requirements. Where the bearing is part of a safety-critical or regulated assembly, follow the responsible equipment manufacturer’s engineering approval process.

Tuoda Bearing supply professional and honest service.

Check the full application envelope

  • Loads: Identify radial and axial loads, load direction, operating cycles, and any shock or vibration.
  • Speed: Compare the required operating speed with the supplier’s rating for the selected bearing and lubrication method.
  • Misalignment: Estimate expected shaft and housing misalignment; do not assume the bearing can compensate for an incorrectly designed support.
  • Temperature: Record normal and peak operating temperatures because temperature affects clearance, lubricant choice, and fit decisions.
  • Lubrication and contamination: Specify grease or oil lubrication, replenishment access, sealing, and exposure to water, dust, or process debris.

Selection framework for buyers

1. Confirm dimensions and mounting arrangement

Measure or obtain the required shaft and housing dimensions, then compare them with the bearing drawing. Check shoulder locations, fillet clearance, locking or retention features, and access for mounting and removal. A nominally matching 60 × 110 × 28 mm bearing may still be unsuitable if the surrounding components or mounting method differ.

2. Validate clearance, fit, and temperature

C3 clearance is not automatically preferable to normal clearance. The appropriate group depends on the fit, temperature difference between components, operating conditions, and the manufacturer’s guidance. Ask an engineer or bearing supplier to review the fit and clearance together, particularly when a tight fit or heat exposure is expected. Do not change from C3 to another clearance group solely because the part appears to fit during a static check.

3. Match lubrication and cage requirements

Confirm whether the W33 groove and holes align with the housing’s lubrication arrangement and whether the intended lubricant is compatible with the speed and temperature. Specify cage material or design if it is a functional requirement, rather than assuming all products with a similar suffix are identical. Also clarify whether the bearing will be supplied open or with any additional sealing or protection features.

4. Review load and speed calculations

Request the dynamic and static load ratings for the exact offered product and compare them with the application calculations. Bearing life depends on factors such as equivalent load, operating speed, lubrication, contamination, and reliability assumptions; a catalog rating alone does not guarantee a service life. If the application has shock loads, frequent starts, or variable speeds, include those conditions in the technical review.

Specification overview

Item Typical identification or value Buyer verification
Bearing type Double-row spherical roller bearing Confirm offered design and drawing
Boundary dimensions 60 mm bore × 110 mm outside diameter × 28 mm width Check the drawing and dimensional standard
CA Commonly associated with a cage/internal design variant Confirm cage material and construction
W33 Generally an outer-ring lubrication groove and holes Check location and compatibility with the housing
C3 Radial internal clearance greater than normal Request the applicable clearance range and confirm suitability

Price, MOQ, and lead-time considerations

Price depends on factors such as order quantity, bearing configuration, material and cage requirements, packaging, and delivery terms. Minimum order quantity and lead time are supplier- and stock-dependent, so buyers should request these details for the exact specification and destination. A low unit price is not a complete comparison if the quotation omits clearance, cage, lubrication features, or inspection documentation.

For a useful comparison, send each supplier the same information: full designation, required quantity, application, preferred delivery schedule, packaging needs, and any documentation requirements. Ask the supplier to state whether the product is available from stock or made to order, and whether a proposed alternative changes any specification. This helps prevent procurement delays caused by suffix or configuration differences.

Supplier evaluation checklist

  • Can the supplier provide a drawing showing the required dimensions and configuration?
  • Are the CA cage details, W33 lubrication features, and C3 clearance explicitly confirmed?
  • Can the supplier provide applicable load ratings and product identification details for technical review?
  • Are quotation validity, MOQ, lead time, packaging, and delivery terms clearly stated?
  • Is there a defined process for handling specification questions and order changes?

At Tuoda Bearing, we support B2B buyers with specification review, product identification, quotation coordination, and export order communication for spherical roller bearing requirements. Share the application details and target quantity so we can confirm the offered configuration and discuss availability. Final selection should be approved against your equipment requirements and the supplier’s technical documentation.

Conclusion

The 22212CA/W33C3 is commonly specified as a 60 × 110 × 28 mm spherical roller bearing with a CA design, W33 lubrication feature, and C3 clearance group. To decide whether it fits your application, verify the drawing, clearance range, cage construction, lubrication arrangement, loads, speed, temperature, and mounting conditions. Your next step is to send the full designation and operating details to a qualified supplier for a written specification and quotation; contact Tuoda Bearing to begin that review.

Want more information on 22212CA/W33C3 Spherical Roller Bearing? Feel free to contact us.

Comments

0 of 2000 characters used

All Comments (0)
Get in Touch

  |   Transportation   |   Toys & Hobbies   |   Tools   |   Timepieces, Jewelry, Eyewear   |   Textiles & Leather Products   |   Telecommunications   |   Sports & Entertainment   |   Shoes & Accessories   |   Service Equipment   |   Sitemap